lC1 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary models a vailable c&k f series miniature rota-slide ? rotary switches features/benefits ? multi-pole and multi-position ? panel and pcb mounting ? positive detent ? value added capability typical applications ? small appliances ? t esting fixtures ? safety equipment specifications contact rating: q contact material: 4 amps @ 125 v ac or 28 v dc; 2 amps @ 250 v ac (ul/csa). see page l-44 foradditional ratings. electrical life: 10,000 make-and-break cycles at full load. contact resistance: below 10 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. indexing: 45oor 90?oo-e contact models; two contact models, 4 pos. max. models with common terminal -90o 4 pos. max. operating & storage temperature: -30o to 65?o materials housing & bushing: 6/6 nylon (ul 94v-2). actuator: 6/6 nylon (ul 94v-2). contacts: q contact material: copper, silver plated. see page l-44 for additional contact materials. terminals: q contact material: copper, silver plated. see page l-44 for additional contact materials. contact spring: music wire or stainless steel. mounting nut: brass, nickel plated. terminal seal: epoxy. note: any models supplied with q or b contact material are rohs compliant. for the latest information r egarding rohs compliance, please go to: www.ittcannon.com/rohs. note: specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult custome service center . build-a-switch to order, simply select desired option from each category and place in the appropriate box. available options are shown and described on pages l-42 thru l-44. for additional options not shown in catalog, consult customer service center. switch function fa05 sp, 90 index, 3 pos. f103 sp , 45 index, 3 pos. f203 dp , 45 index, 3 pos. fa01 spdt, 90 index fc03 sp, w/common 90 index, 3 pos. terminations 02 pc thru-hole wc wire lead seal none no seal e epoxy seal contact material q silver b gold actuator 15 s crewdriver slot without bushing 08 .585" high with .156" flat mounting style rn pc rs 5/16-32 threaded bushing
lC2 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary c&k f series miniature rota-slide ? rotary switches switch function 45o in dexing schematics f1xx models f2xx models fa01 model fa05 model fcxx model c= common terminal 9 0 o in dex ing s c h ema tics 7 6 5 8 3 4 2 break-before-make contacts. terminal numbers are molded on bottom of housing. actuators are shown in position 1. f1xx, f2xx models: no common terminal is present. switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. note: *switches with 2?c terminations have additional terminal no. 5 as switch support only. this terminal is not connected electrically inside switch. break-before-make contacts. terminal numbers ar e molded on bottom of housing. actuators are shown in position 1. faxx models: no common terminal is present. switching function is pr ovided by movable contacts shorting adjacent pairs of stationary contacts. fcxx models: common terminal is present. note: *switches with 2?c terminations have additional terminal no. 5 as switch support only. this terminal is not connected electrically inside switch. part number show: fc0315rn02q al l te r mi na ls 3 po s ition f2 0 3 dp 8-1-2-3* 3 po s ition f1 0 3 sp te rmin als sw itc h functi on model no . no . poles 45o indexing c-1,c- 2,c- 3 3 po s ition fc 03 sp wit h co m mo n 8-1-3-5 3 po s ition f a0 5 8-1-3 sp dt f a0 1 sp te rmin als sw itc h functi on model no . no . poles 90o indexing
lC3 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary c&k f series miniature rota-slide ? rotary switches actuator mounting style terminations 5/16 in . bushing panel mounting pc mounting 15 screwdriver slot without bushing 08 .585" high with .156" fla 02 pc thru-hole f1xx, f2xx & faxx models fcxx models wc wire lead 02 pc thru-hole rs 5/16-32 threaded bushing rn pc shown with n?ounting style; not available with s?ounting styleor fcxx models. pc mount, no bushing, position numbers molded standar d. shown with 5?ctuator; not available with 8?ctuator or fcxx models. panel mount, with 5/16 in.C2 threaded bushing. mounting nut (p/n 175020201) included. mustbe or der ed with 8?ctuator option. black wire standard, other colors and lengths available, consult customer service center . ul style 1015. must be or dered with s?ounting style.
lC4 dimensions are shown: inch (mm) specifications and dimensions subject to change www .ittcannon.com l rotary c&k f series miniature rota-slide ? rotary switches contact material seal e epoxy seal none no seal not available on fcxx models. * note: see technical data section of this catalog for rohs compliant and compatible definition and specifications. 1 contacts & terminals: copper, with gold plate over nickel plate. 2 contacts & terminals: copper, silver plated (standard with all termination options). all models with all options when ordered with ?ontact material. note: any models supplied with q or b contact material are rohs compliant. for the latest information regarding rohs compliance, please go to: www.ittcannon.com/rohs. co n t ac t an d option co d e te rmin al mater ial ra ti n g q 4 a m ps @ 1 25 v a c o r 28 v d c ; 2 a m ps @ 2 50 v a c (ul/csa ). low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x. rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s g old 1
|
